COMTRAXX COM465IP Condition Monitor für Bender-Systeme mit

The COM465IP is a condition monitor with an integrated gateway. The intuitive COMTRAXX user interface provides a perfect system overview and enables simple and intuitive parameterization of all connected devices. It is based on HTML5 and is therefore future-proof and accessible.

The COM465IP transmits the data of the devices in the system in accordance with Modbus TCP and SNMP. Queries from all communication-capable Bender devices, such as EDS, RCMS, MEDICS or PEM systems, can thus be integrated into a Modbus TCP or SNMP system.

It has several interfaces and can therefore integrate all Bender devices as well as third-party devices into the system.

Main features:

- Complete system overview

- Parameterization of all Bender devices

- All Bender communication interfaces

- Display in the web browser, therefore no local software installation required

-Individually adaptable to requirements thanks to the function modules (optional)

Features and functions:

- Condition monitor for Bender systems

- Integrated modular gateway between Bender system and TCP/IP enables remote access via LAN, WAN or Internet

- Range of functions can be customized using function modules

- Ethernet (10/100 Mbit/s) for remote access via LAN, WAN or Internet

- Support for devices connected to the internal or external BMS bus, via BCOM, via Modbus RTU or Modbus TCP

Technical features:

- Display LEDs

- Supply voltage Us: 24...240V AC/DC

- Maximum 31 devices on the BMS bus without interface amplifier

- Native integration into existing BMS bus structures

- via BCOM interface (see BCOM manual)

- connected via Modbus RTU or Modbus TCP (max. 247 devices)

- Mutual monitoring of display units possible (TCP, TM800, MK800, MK2430)

- Integrated Ethernet RJ45, 10/100 Mbit/s

- History memory for 1000 entries

- Dimensions: WxDxH 63x 74x 93mm

Applications:

- Remote display of current measured values, operating/alarm messages and parameters

- Gateway to Modbus TCP: Readout of current measured values, operating/alarm messages from addresses 1...10 of your own subsystem via Modbus TCP

- Ethernet interface with 10/100 Mbit/s for remote access via LAN, WAN or Internet

- Setting for internal parameters and for configuring Bender universal measuring devices and energy meters

- Time synchronization for all assigned devices

- History memory (1,000 entries)

- Data logger, freely parameterizable (30 - 10,000 entries)

- 50 data points from third-party devices (via Modbus RTU or Modbus TCP) can be integrated into the system.

- A virtual device with 16 channels can be created. No reports can be generated - not even for your own device

Installation position:

According to the technical device manual: front-oriented, cooling slots must be ventilated vertically