CMS460DCH-4 Laststrom-Monitor mit 3 Messkanälen zur Über-

The CMS460 system consists of one or more CMS460-D load current evaluation devices, which can detect and evaluate load currents in earthed and unearthed power supplies via the associated measuring current transformers. The maximum voltage of the monitored network depends on the rated insulation voltage of the measuring current transformers used in busbar systems or the cables or lines used.

The W... (closed), WR... (rectangular), WS... (divisible) and WF... (flexible) series measuring current transformers are used for AC and pulse currents. The various measuring current transformers can be connected to the measuring channels of the evaluation units in any combination. Each CMS460-D has 12 measuring channels. A total of up to 90 load current evaluation devices can be connected via BMS bus (RS-485 interface with BMS protocol) and thus up to 1080 measuring channels (outgoing circuits) can be monitored.

The frequency response can be set accordingly for use in fire and system protection. The measured currents can be analyzed for harmonics.

Features and functions:

- Optional AC and pulse current sensitive measurement for each channel

- RMS value measurement

- 12 measuring channels per individual device for load current

- Up to 90 CMS... evaluation units in the system (1080 measuring channels)

- Fast parallel monitoring for all channels

- Response ranges 100 mA...125 A (42...2000 Hz)

- Preset function

- Adjustable time delays

- Adjustable frequency behavior (e.g. fire and system protection)

- History memory for 300 data records/channel

- Data logger for 300 data records/channel

- Analysis of harmonics, THD

- Two alarm relays with one changeover contact each

- Working current/quiescent current and fault memory selectable

- External test and reset button connection

- Illuminated graphic display (7-segment display) and alarm LEDs

- Data exchange via BMS bus

- Password protection for device settings

- RoHS-compliant

Technical features:

- Rated voltage: AC 250 V

- Number of measuring channels: 3

- Special firmware suitable for Swiss applications

- External measuring current transformer: STW2/STW3/STW4

- Measuring range: 1 A...63 A

- LC display: Illuminated graphic display

- History memory: 300 data records

- Data logger: 300 data records per measuring channel

- Connection type: Screw terminals

- Dimensions: W 108 x H 90 x D 74mm