ICC1324 Home-Plus Laderegler

The ICC1324 is a 4th generation charge controller. Its PCB design makes it even easier and more flexible to install in charging stations or wallboxes.

Main features:

- 6 mA DC fault current detection

- Dynamic load management (DLM)

- Integrated safety functions

- Regular SW updates

- PLC according to ISO 15118

- WiFi, Ethernet on board

Functions and features:

- Charge controller in accordance with IEC 61851-1 (charging mode 3)

- Master and slave operation configurable

- For setting up charging stations with two charging points: 1 charge controller as data gateway with 4G modem and 1 charge controller as slave without 4G modem

- Dynamic load management to optimally distribute the available power among all charging points and to signal the maximum power to the vehicle in each case

- Patented DC fault current monitoring module (external RCD type A required), different cable lengths can be selected

- Integrated emergency opener for motor control (locking/unlocking)

- Can be integrated into single-phase or three-phase networks up to 3x 32 A

- OCPP 1.5 and OCPP 1.6 compliant with JSON, SOAP

- Integrated 4G modem

- 3 USB interfaces:

- 1 CONFIG interface (type B) for local configuration and installation of software updates

- 2 USB host interfaces (type A)

- Control Pilot and Proximity Pilot communication (according to IEC 61851-1)

- Meter interface: Modbus TCP and RTU

- External Modbus interface for remote control via energy management systems

- Additional inputs and outputs for extended control of the charge controller

- Internal temperature sensor to reduce the charging current depending on the ambient temperature

- ISO 15118 Powerline Communication (PLC) for plug & charge, autocharge and consumer management systems

- Integrated WiFi module and two Ethernet interfaces

- AC 230 V supply voltage

- Integrated DC 12 V power supply for customer-specific applications

Application:

AC charging station for electric vehicles and wallboxes