HT9015 Digitale Stromzange 600A AC TRMS für AC-DC Messungen

The professional current clamp HT9015 was developed to measure direct & alternating currents up to 600A in the overvoltage category CAT IV 600V or CAT III 1000V and to comply with the specifications of IEC/EN61010-1. This TRMS measuring current clamp is equipped with a large 6000 point resolution display and an AutoPowerOFF function to conserve battery life. The HT9015 also offers a variety of multimeter measurement functions with a wide measurement range.

Functions:

-DC voltage from 0.01mV to1000 V

-AC voltage TRMS from 1mV to1000 V

-DC current from 0.01 mA to 600 A

-Frequency measurement up to 60 KHz

-AC current TRMS from 0.01 A to 600 A

-Resistance from 0.1 to 60 MÙ

-Temperature with K-type sensor

-Data HOLD, MAX/MIN, Peak function (<10 ms)

-Diode test

-Resistance/continuity test

-"Voltage" sensor

-Duty cycle, automatic range selection

-Relative measurement, bar graph,

Technical features:

-Max. Cable diameter: 30 mm

-Backlighting

-Display: LCD, 4 digits, 6000 dots

-Dimensions (L x W x H): 210 x 75 x 45 mm

-Weight: 400 g

Scope of delivery:

- Current clamp

- batteries

- Protective bag

-Operating instructions

ENo. 980 276 009