Solar Kennlinienmessgerät mit 1ph.

In addition to power analysis (AC & DC) of a single-phase PV system, the SOLAR I-Ve also enables the current-voltage characteristic curve of individual photovoltaic modules or a module string up to max. 1000 V and 15 A to be determined (see also model I-V400w).

PV module test function:

- Peak power Pmax (at STC) and the currently measured power

- Short-circuit current Isc and open-circuit voltage Uoc

- Current Impp and voltage Umpp

- Fill factor FF in %

- a graphical representation of the I-V and PWR characteristic curve for OPC and STC

- the overall result of the test

PV system test function:

- Voltage measurement in AC & DC

- Current measurement in AC & DC

- Power in AC and DC (1-phase systems only)

- Efficiency of the inverter

- Efficiency of the generator side

- Temperature and solar irradiation in (W/m2)

Technical features;

- Display: LCD with backlight, 128 x 128 pixels

- Memory: 256 Kbytes, storable curves: > 200

- Internal: 6 x 1.5 V alkaline batteries type AA LR06

- Auto Power OFF: after 5 min without use

- Dimensions (H x W x D): 235 x 165 x 75 mm

- Weight (incl. batteries): 1.4 kg

- Protection class: IP50

- Interface: Wi-Fi and USB

- Reference temperature: 23 °C ... ± 5 °C

- Operating temperature / humidity: 0 ° ... 40 °C / < 80 % RH

- Storage temperature / humidity: -10 ° ... + 60 °C / < 80 % RH

- Electrical safety: IEC/EN 61010-1

- Measurements: IEC/EN 60891

- Insulation/pollution degree: Class 2 (double insulation) / 2

- Overvoltage category: CAT II 1000 V, CAT III 300 V to earth,

- max. 1000 V between the inputs

Scope of delivery:

- VA500 device protection case

- Duo irradiation sensor HT304

- External data logger SOLAR-02

- PT300N temperature sensor

- Inclinometer M304

- Four-wire measuring cable KIT GSC4

- KITPV-MC3 Measuring adapter KIT-MC3

- KITPV-MC4 Measuring adapter KIT-MC4

- AC current transformer 200 A AC HT4005K

- DC current transformer 10 A/100 A AC HT4004N

- 6 x 1.5 V AA batteries

- USB connection cable C2006

- Measured value memory for 200 measurement curves

- CD-ROM with TOPVIEW* evaluation software

- Operating instructions

- Calibration protocol ISO 9000

ENo. 969 980 209