UMG 509-PRO-230V-CH-UL Master Messgerät RCM

The UMG 509-PRO is a powerful network analyzer with residual current monitoring, it can measure harmonics up to the 63rd harmonic. The analyzer is used in all levels of TN & TT networks as well as in IT networks for monitoring voltage quality, residual current monitoring and energy data management. It also has a 256 MB measurement data memory and can be graphically programmed with Jasic (PLC functionality). Network interfaces and the open communication architecture with numerous protocols (Modbus, IP) enable simple integration into higher-level systems. Two digital inputs and outputs and a temperature measurement input are available at field level.

Pre-installed APPs:

- Measured value monitor

- IEC 61000-2-4 Watchdog PRO light

- Push Service PRO (optional, not pre-installed)

Main features:

-Optec memory recording set Switzerland

- Measured value monitor: Graphically prepared displays on the device's own homepage without additional software installation

- IEC 61000-2-4 Watchdog PRO light: Permanent monitoring of the power quality in accordance with the IEC 61000-2-4 standard in customer supply networks

- Push Service PRO: Automatic data transmission of measurement data directly from the measuring device to a cloud service

- Harmonic analysis up to the 40th harmonic, detection of short-term interruptions

- Transient detection, display of waveform (current and voltage), unbalance, pointer diagram

- User-friendly, color graphic display with intuitive user guidance

- Ethernet interface and web server

- High flexibility through the use of open standards

- Individual forwarding via e-mail dispatch, switching of digital outputs, etc.

- Communication: Profibus (DP/V0), Modbus (RTU, TCP, Gateway), TCP/IP, BACnet (optional)

- Up to 4 ports simultaneously

- HTTP, FTP (file transfer), TFTP, NTP (time synchronization), SMTP (e-mail function), DHCP

- Large measurement data memory (256 MB Flash), 32 MB SDRAM

- Interfaces: Ethernet, Profibus / RS485 (DSUB-9)

- 2 digital inputs

- 2 digital outputs

Communication:

- Protocols: Profibus (DP/V0)

- Modbus (RTU, TCP, Gateway)

- TCP/IP

- BACnet (optional)

- HTTP (homepage)

- FTP (file transfer)

- SNMP

- TFTP

- NTP (time synchronization)

- SMTP (e-mail function)

- DHCP

Interfaces

- Ethernet 10/100TX

- Profibus (DSUB-9)

- RS485 Modbus (terminal strip)

Measuring accuracy

- Work: Class 0.2S (... / 5 A)

- Current: 0.2 %

- Voltage: 0.1 %

Device's own homepage

- Detailed online measured values without software installation

- Extension through optional APPs

-Voltage quality

- Harmonics up to the 63rd harmonic

- Short-term interruptions (from 20 ms)

- Transient recorder (> 50 μs)

- Inrush currents (> 20 ms)

- Unbalance

Networks

- IT, TN, TT networks

- 3- and 4-phase networks

- Up to 4 single-phase networks

Measurement data memory

- 256 MByte Flash

- 32 MB SDRAM

PLC functionality

- Graphical programming

- Jasic programming language

- Programming limit values etc.

2 digital inputs

- Pulse input

- Logic input

- Status monitoring

- HT / NT changeover

2 digital outputs

- Pulse output kWh / kvarh

- Switching output

- Limit value output

- Logic output

Temperature measurement input

- PT100, PT1000, KTY83, KTY84

RCM - Residual Current Monitoring

- 2 residual current inputs

Grid visualization software

- Free GridVis Essentials

Installation:

-3-phase, 3 and 4-wire connection voltage 3x400/230V

-Current transformer programming: ..../5A,

- Supply voltage: 95-240VAC / 80-300VDC

-Dimensions: W 144x H 144x D 75 mm