This range complements selected articles

Current transformer RX

Stromwandler mit Kabeldurchführung für den Schienenaufbau ab Lager lieferbar

Current transformer Disconnectable RX

Die mit einem robustem Scharnier trennbaren Wandler lassen sich einfach in bestehende Installationen einbauen. Das spart Zeit und Geld, weil keine Leiter getrennt werden müssen

Isolating current transformer KUW-1

Kabelumbau-Wandler bis 18 mm Durchmesser


Isolating current transformer KUW-2

Kabelumbau-Wandler bis 28 mm Durchmesser


Isolating current transformer KUW-4

Kabelumbau-Wandler bis 42 mm Durchmesser


Janitza current transformer

Stromwandler von Janitza - Höchste Qualität für beste Messergebnisse


J.52.16.227-PRO

UMG 605 E-PRO 230V-CH-UL Messgerät nach EN50160

PQ Messgerät mit Schnittstelle TCP-IP, Uhr und Speicher
mit vorinstallierten App's: Messwertmonitor, EN 50160 Watchdog
IEC 61000-2-4 Watchdog, (Push Dienst optional)

Product description

The UMG 604-PRO power quality analyzer is more than just a multifunctional measuring device. It can be used as a transient recorder, meter (kWh, kvarh), harmonic analyzer, PLC, condition monitor, event recorder and data collector. The UMG 604-PRO can be regarded as the counterpart of the front-mounted devices in a slim and cost-optimized top-hat rail format. It also offers several interfaces with numerous protocols (Modbus, IP, SNMP, NTP, HTTP, BACnet, ...), as well as a temperature measurement input. The 128 MB measurement data memory is used for redundant and secure measurement data recording.


Main features:

- Measured value monitor: Graphically prepared displays on the device's own homepage without additional software installation

- EN 50160 Watchdog PRO: Permanent monitoring of the power quality in accordance with EN 50160 in power supply networks

- IEC 61000-2-4 Watchdog PRO: Permanent monitoring of the power quality in accordance with IEC 61000-2-4 in customer-side supply networks

- Push Service PRO: Automatic data transmission of measurement data directly from the measuring device to a cloud service

- Recording and storage of transients (> 50 µs)

- Continuous power quality monitoring (e.g. EN 50160)

- Harmonic analysis up to the 63rd harmonic, even/odd

- Interharmonics, distortion factor THD-U / THD-I, measurement of positive-sequence, negative-sequence and zero-sequence systems

- Flicker measurement in accordance with DIN EN 61000-4-15

- Recording and storage of transients (> 50 µs)

- Recording of short-term interruptions (from 20 ms)

- Monitor start-up processes

- Recorder for limit value events

- Recording and digitization of effective values (true RMS) of currents and voltages (15 - 440 Hz)

- Recording of more than 2,000 measured values per measurement cycle (200 ms) /li>

- Automatic generation and dispatch of power quality reports

- Modern communication architecture via Ethernet

- Fast and reliable data transmission via RS485 interface, up to 921.6 kB/s

- Convenient homepage and e-mail functions

- Communication: Profibus (DP/V0), Modbus (RTU, TCP, Gateway), TCP/IP, BACnet (optional)

- HTTP, FTP (file transfer), TFTP, NTP (time synchronization), SMTP (e-mail function), DHCP, SNMP

- Interfaces: Ethernet, RS485 (Modbus and Profibus), RS232

- 2 digital inputs and 2 digital outputs



Communication: Profibus

- Profibus (DP/V0)

- Modbus (RTU, TCP, Gateway)

- TCP/IP

- BACnet (optional)

- HTTP (freely configurable homepage)

- FTP (file transfer)

- TFTP (automatic configuration)

- NTP (time synchronization)

- SMTP (e-mail function)

- DHCP

- SNMP


Interfaces

- Ethernet

- RS232

- RS485 (Modbus and Profibus)


Measuring accuracy

- Work: Class 0.5S (... / 5 A)

- Current: 0.2 %

- Voltage: 0.2 %


Peak load optimization (optional)

- Up to 64 switch-off stages


Voltage quality

- Harmonics up to the 63rd harmonic, even / odd

- Flicker measurement

- Short-term interruptions (from 20 ms)

- Transient recorder (>50 μs)

- Inrush currents

- Unbalance

- Half-wave RMS value recordings (up to 4.5 min.)


Networks

- IT, TN, TT networks

- 3- and 4-phase networks

- Up to 4 single-phase networks


Measurement data memory

- 128 MB Flash


Programming language

- Jasic


2 digital inputs

- pulse input

- Logic input *

- Status monitoring *

- HT / NT switchover

- Emax reset


2 digital outputs

- Pulse output kWh / kvarh

- Switching output *

- Limit value output *

- Emax output *

- Logic output *


*(expandable via external I/O modules)


Temperature measurement input

- PT100, PT1000, KTY83, KTY84


Grid visualization software

- Free GridVis Essentials


Installation:

- 3-phase, 3 and 4-wire connection

- Voltage 3 x 400/230V

- Current transformer programming: .../5A,

- Integrated web server for measured value display

- Recording and evaluation suitable for EN50160

- Interfaces: Ethernet 100base T,

- Master-Slave with RS485; RS232

- Dimensions for DIN: W 107.5 x H 82 x D 90mm


Read more
Downloadcenter
Shop
Contact