M-BUS pulse acquisition module with 10 S0 inputs
Product description
The M-Bus S0 converter optec MB-10S0 is used to connect up to consumption meters with S0 interface or devices with conventional pulse interface (relay contact or optocoupler) to the M-Bus system.
Features and functions:
-M-Bus pulse acquisition module with 10 S0 inputs
-S0 interfaces in accordance with DIN EN 62053-31)
-Integration of meters with conventional pulse interface
-Freely selectable pulse value of the S0 inputs
-M-Bus protocol in accordance with DIN EN13757-2 and 3)
-Baud rate 300, 2400, 9600
-Baud can be flexibly parameterized via the M-Bus
-Write protection for parameters Storage of meter data in the event of power failure
-Top-hat rail mounting
-Optionally available with 24Vdc or 230Vac power supply
-Housing according to EN 50022 for mounting on DIN rails
Technical features:
-Supply voltage 20V to 28V AC/ DC
-Inputs 10x S0, remote readout M-BUS,
-Data storage min. 10 years and 10,000 cycles in EEPROM
-Transmission media two-wire (M-Bus)
-Operating temperature 0 ... 55°C
-Relative humidity 0 ... 90% (non-condensing)
-Housing according to EN 50022 for mounting on DIN rail 35mm,
-Dimensions (L x W x H) 108 x 90 x 66 mm