UMG 806-LP Modular universal measuring device
Product description
The UMG 806-LP offers measurement inputs for the connection of low-power converters. These converters are characterized by a very low output voltage on the secondary side. Due to the low signal on the transformer cable, the secondary side of the transformer does not have to be short-circuited in open operation. This increases safety during installation and considerably simplifies the installation process. In addition, low-power converters offer price advantages compared to many conventional converter models, making them a cost-effective alternative.
Functions and features:
4 low-power converters with 333 mV
Differential current measurement
Temperature input
Pulse output
Modbus-RTU onboard
Modbus-TCP - per module
SNMP V2c - per module
Power quality measurement:
Harmonics up to the 31st harmonic
Internal 4 MB data memory
Technical features:
Nominal voltage 100...300 V AC/DC
Power consumption max. 7 VA
Display with backlight
90 mm × 90 mm × 63.5 mm
Protection class IP20
Voltage measurement:
230 VLN / 400 VLL (+/-10%) acc. to IEC
400 VL-L (+/-10%) acc. to IEC
Sampling frequency 8 kHz / phase
Current measurement (333 mV)
Rated current RCM 40 mA
4 channels
Measuring range 0.005 ... 6 Arms
Interface:
RS485 interface 2-wire
Modbus-RTU protocol
Transmission rate up to 38.4 kbps
Functional note:
With module EI1 compatible with RCM 202-AB, for retrofitting type A and type B measurement
Application note:
Ideal for top-hat rail applications in data centers and industry
Complete integration into Gridvis