J.14.02.042

UMG 806-LP Modular universal measuring device

grid visualization software GridVis-Essential included

Product description

The UMG 806-LP offers measurement inputs for the connection of low-power converters. These converters are characterized by a very low output voltage on the secondary side. Due to the low signal on the transformer cable, the secondary side of the transformer does not have to be short-circuited in open operation. This increases safety during installation and considerably simplifies the installation process. In addition, low-power converters offer price advantages compared to many conventional converter models, making them a cost-effective alternative.


Functions and features:

4 low-power converters with 333 mV

Differential current measurement

Temperature input

Pulse output

Modbus-RTU onboard

Modbus-TCP - per module

 SNMP V2c - per module


Power quality measurement:

Harmonics up to the 31st harmonic

Internal 4 MB data memory


Technical features:

Nominal voltage 100...300 V AC/DC

Power consumption max. 7 VA

Display with backlight

90 mm × 90 mm × 63.5 mm

Protection class IP20


Voltage measurement:

230 VLN / 400 VLL (+/-10%) acc. to IEC

400 VL-L (+/-10%) acc. to IEC

Sampling frequency 8 kHz / phase


Current measurement (333 mV)

Rated current RCM 40 mA

4 channels

Measuring range 0.005 ... 6 Arms


Interface:

RS485 interface 2-wire

Modbus-RTU protocol

Transmission rate up to 38.4 kbps


Functional note:

With module EI1 compatible with RCM 202-AB, for retrofitting type A and type B measurement


Application note:

Ideal for top-hat rail applications in data centers and industry

Complete integration into Gridvis



Read more
Downloadcenter
Shop
Contact